Skip to content

Enterprise time clock terminals

Enterprise time clock terminals for every entrance.

Eight LEM terminals record clock-in and clock-out by card, NFC, QR, PIN, face or fingerprint, and can open the door for the right people. They keep recording when the network drops and feed one system across all your sites. Delivery and installation are free anywhere in Cyprus.

  • Eight models, one system
  • Clock-ins kept through outages
  • Free installation in Cyprus
LEM Ai10 time clock terminal on a floor stand at an office lobby entrance

What is an enterprise time clock terminal?

A device at the entrance that identifies each employee, records the clock-in or clock-out time and sends the record to the attendance system. An enterprise terminal also has to serve many sites and doors, keep recording when the network fails, open doors only for the right people, and handle personal data within the GDPR. The rest of this page sets out what to check.

What an enterprise terminal must do

A terminal that only shows the time is a wall clock. Check these before you buy:

  • Identify people by a method you can justify: card, NFC, QR or PIN for everyday attendance, face or fingerprint only where a documented need exists.
  • Keep clock-ins when the network or the server cannot be reached, and send them later with the time the terminal recorded.
  • Count a clock-in once, even when it arrives twice.
  • Report its own health: online or not, when it was last seen, and whether records are waiting.
  • Open a door only for the people, entrances and hours you allow, and record the refusals.
  • Feed one system for every site, with each manager seeing only their own sites and departments.
  • Connect without an open inbound port on your network.

Many sites, one record

Mix models to suit each entrance: a large face terminal in the head-office lobby, a waterproof one at a yard gate, a card terminal in a small branch. Employees, access rules and attendance records stay synchronised in one Attendance environment.

Managers work within the sites and departments granted to them, and administrators keep the view across the organisation. The live view shows who arrived, who is late and who is missing, by location, department and shift.

When the network drops

Each terminal keeps its own log. Attendance also collects from the gateway on a rolling check with a five-minute overlap, so a record lost in transit is picked up on the next pass. When the connection returns, clock-ins stored during the gap are imported with the time the terminal recorded, not the time they arrived, and an event that arrives twice counts once.

Sites that must keep working without internet can run the Attendance Gateway on their own premises, with its own administration screens and a local record of terminal clock-ins.

Attendance and doors on one terminal

Use the terminal for attendance only, or connect it to an electric lock, gate or turnstile. Choose which entrances each employee or team can use, on which days and at which hours. Rejected and suspicious attempts stay in the security history and can alert the responsible managers.

Every model has a Wiegand connection, so a terminal can sit in front of an access controller you already own. The LEM Gate 8 adds a video intercom to your reception or an indoor unit.

Biometrics and the GDPR

A face or fingerprint used to identify a person is special-category data under Article 9 of the GDPR. In Cyprus, the Commissioner for Personal Data Protection treats biometric clock-in for routine attendance as disproportionate, and the employee's consent does not cure it. Biometrics can be justified, by exception, for physical access to high-security areas.

Spain's data protection authority reached the same view on consent for working-time records in its November 2023 guidelines. So plan everyday attendance on card, NFC, QR or PIN. Every LEM terminal supports card and NFC readers, and each face model also lists the non-biometric methods it accepts.

Sources: [1][2][3]

Integration and hosting

Attendance works on its own for people, schedules, attendance and approvals. It connects to HR or payroll software through a file, an API or a web service, and approved hours lock before export or a payroll connection.

Run it in the environment Lemorange manages, with its origin servers in Finland, in the EU, or privately on your own servers, with the network, servers and access under your control. Each terminal makes an outbound connection, so no inbound port has to be opened.

Which model for which entrance

Start from the entrance, not the catalogue.

  • A busy lobby read from a distance: LEM Ai10, with a 10.1″ screen and five faces at once.
  • An outdoor or exposed staff door: LEM Ai8 Pro, IP65 waterproof in an aluminium case.
  • Gates and turnstiles with a reception screen: LEM Gate 8.
  • Face and QR together at a busy entrance: LEM Ai3.
  • No biometrics at all: LEM 1009, a 4″ touchscreen with NFC phone clock-in, or LEM 1008, a small screen with a numeric keypad.

Buying, installation and support

Delivery and installation are free anywhere in Cyprus: we deliver the terminal, mount it and connect it. Outside Cyprus, delivery is quoted per order and the terminal arrives set up, ready for you to mount.

Every terminal has a 24-month warranty: if it stops working as it should, we replace it. You can also rent to own: after 24 months of rental, the terminal is yours. Terminals are quoted per order, and the software is priced separately by the features you use and the number of people.

The eight terminals compared

Figures from each model's own page. Open a model for its full specifications.

ModelClock-in methodsScreenCredential capacityStored eventsConnectionOperating temperature
LEM Ai10Face · Fingerprint · QR · RFID card · NFC · PIN10.1″ HD screen · 1280×80050,000 faces · 100,000 fingerprints · 50,000 cards500,000PoE · Ethernet · Optional Wi-Fi-15°C to +50°C
LEM Ai8 ProFace · Fingerprint · QR (camera) · RFID card · NFC · PIN8″ IPS touchscreen · 800×128050,000 faces · 100,000 fingerprints · 50,000 cards500,000PoE · Ethernet · Wi-Fi0°C to +45°C
LEM Ai8Face · QR · RFID card · NFC · PIN8″ capacitive touchscreen · 800×128050,000 faces · 50,000 cards · 50,000 PINs500,000PoE · Ethernet · Optional Wi-Fi-15°C to +45°C
LEM Gate 8Face · QR · RFID card · NFC8″ HD capacitive touchscreen · 1280×80020,000 users1,000,000Ethernet · Optional Wi-Fi and 4G-15°C to +60°C
LEM Ai3Face · QR · RFID card · NFC · PIN5″ IPS touchscreen · 1280×72015,000 QR · 5,000 face/card/PIN profiles · 50,000 optional500,000PoE · Ethernet · Wi-Fi · Optional 4G · Backup battery0°C to +45°C
LEM Ai2Face · Fingerprint · RFID card · NFC · PIN4″ HD touchscreen15,000 users · 5,000 faces · 10,000 fingerprints500,000PoE · Ethernet · Wi-Fi · Backup battery0°C to +45°C
LEM 1009QR · RFID card · NFC · PIN4″ touchscreen100,000 users · 100,000 cards/QR codes · 100,000 PINs1,000,000PoE · Ethernet · Optional Wi-Fi · Backup battery0°C to +45°C
LEM 1008QR · RFID card · NFC · PIN2.8″ colour screen · numeric keypad100,000 QR codes · 5,000 cards · 5,000 PINs500,000PoE · Ethernet · Optional Wi-Fi · Backup battery0°C to +45°C

RFID and NFC: every model can be fitted with an RFID reader, an NFC reader or both.

Sources

  1. Cyprus Commissioner for Personal Data Protection, Opinion 2/2018 on CCTV and biometrics in the workplace (Greek; archived copy of 15 May 2025; the Commissioner no longer publishes it online)
  2. GDPR, Article 9: special categories of personal data
  3. Spanish Data Protection Agency (AEPD), Guidelines on clocking and attendance control using biometric systems, November 2023

General information, not legal advice. Your organisation remains responsible for its own legal assessment.

Questions about enterprise time clocks

What makes a time clock terminal enterprise grade?

It serves many sites and doors from one system, keeps clock-ins when the network fails, counts each one once, reports its own health, controls doors where needed and connects without an open inbound port.

Can one system run terminals at many sites?

Yes. Any mix of the eight LEM models stays synchronised in one Attendance environment, and each manager works within the sites and departments granted to them.

What happens to clock-ins when the internet is down?

The terminal keeps recording in its own log and sends the records when the connection returns. Attendance imports them with the time the terminal recorded and counts a duplicate once. An on-site Attendance Gateway can keep a whole site recording without internet.

Is face recognition allowed for clocking in, in Cyprus?

Not for routine attendance. The Commissioner for Personal Data Protection treats it as disproportionate, and consent does not cure it. Use card, NFC, QR or PIN for attendance, and keep face or fingerprint for doors with a documented high-security need.

Can the same terminal open the door?

Yes. One identification can record the clock-in and, when the person is allowed, unlock the door. Access control is optional.

Can we run the system on our own servers?

Yes. Attendance can run privately on infrastructure your organisation controls, or in the environment Lemorange manages.

How much does a terminal cost?

Terminals are quoted per order. Delivery and installation are free in Cyprus, every terminal has a 24-month warranty, and rent to own is available. The software is priced separately.

Do you supply terminals outside Cyprus?

Yes. Delivery is quoted per order and the terminal arrives set up, ready for you to mount.

Tell us about your entrances.

Bring the number of sites and doors, how people clock in today and any equipment already on the wall. We will map the terminal and the connection for each entrance.

Plan your terminals