The largest screen in the range, for a lobby.
A 10.1″ HD screen that reads from across a lobby, with dual cameras that recognise up to five faces at once, a fingerprint reader, card, PIN and QR. A photo is taken at every check-in and check-out.
LEM Ai10Face and Fingerprint Time Attendance and Access Control Terminal, 10.1″
What this one is good at
A 10.1″ screen
1280×800, readable from a distance, showing and announcing the name of the person recognised.
Five faces at once
Up to five people in the same frame, in under 0.2 seconds, at 0.5 to 2.5 metres, with the manufacturer's 99.70% accuracy figure.
Fingerprint as well as face
A reader with room for 100,000 fingerprints, for the people and the mornings where a face is not the right answer.
Card, PIN and QR
An ID or IC card (the reader is an option), a PIN, or a QR code, so the same terminal runs without biometrics.
A photo at every check-in and check-out
Kept with the punch and shown in Attendance.
Strong light, backlight and darkness
Wide dynamic range and automatic infrared and white fill light, from 0 to 50,000 lux, and a working range from -15°C to +50°C.
With Attendance
The door happens, and it is in the software.
This is not a terminal you buy and then find an export routine for. It is integrated with Attendance at attendance.cy, and a punch at this door is in the live view before the person has finished walking through it.
Real time, not a poll interval
The gateway holds an open stream and pushes every event the instant it happens. No refresh, no five-minute wait, no "last synced at". Somebody checks in and the board has them.
Three layers, so nothing is lost
The push is the fast path. Behind it Attendance polls on a watermark with a five-minute overlap, and behind that the terminal keeps its own log: up to a million events. Cut the network for a week and every punch still arrives, carrying the time it was made.
Straight into hours, not a spreadsheet
The punch becomes a shift, the shift becomes hours, and the hours become an approved payroll batch: in one record, with the corrections attached to it. Nothing is re-keyed and nothing is reconciled by memory at the end of the month.
You can see the terminal itself
Online or not, when it was last seen, and whether collection is current or overdue: per unit, in the portal. A terminal that quietly stops reporting is visible the same day rather than when somebody queries a missing shift.
Right for
- A busy main entrance or lobby where the screen is read from a distance
- Sites that want face and fingerprint on one unit
- Turnstiles and reception desks with a floor stand or bracket
Not right for
A narrow door frame or a turnstile post: at 299 × 161 mm it wants wall space or a stand. For an exposed outdoor position, the LEM Ai8 Pro is the waterproof one.
Every angle
On a floor stand in an office lobby
Buying
- Delivery and installation
- Free anywhere in Cyprus: we deliver it, mount it and connect it. Outside Cyprus, delivery is quoted per order and the terminal arrives set up, ready for you to mount.
- 24-month warranty
- If it stops working as it should, we replace it.
- Rent to own
- Pay monthly instead of up front. After 24 months the terminal is yours. Ask us for the monthly rate.
- Software
- Sold separately. The price depends on the features you use and how many people you have. Ask us.
Face recognition for everyday attendance is restricted in Cyprus. The LEM Ai10 also works with card, PIN or QR code, so the same terminal runs without biometrics. When biometric attendance is allowed in Cyprus
Specifications
Recognition
- Methods
- Face, fingerprint, PIN, card, QR code
- Face accuracy
- 99.70%
- Recognition speed
- ≤0.2s
- Simultaneous faces
- Up to 5
- Recognition distance
- 0.5-2.5 m 0.5-1.5 m with live-face detection on.
- Cameras
- 2MP colour (WDR) + 2MP infrared
- Anti-spoofing
- Dual-camera live detection Refuses photographs and video.
- Check-in photo
- Taken at every check-in and check-out Kept with the punch and shown in Attendance.
- Lighting
- WDR; automatic infrared and white fill light Ambient light from 0 to 50,000 lux.
- Card
- ID and IC card; reader optional
- Voice
- Shows and announces the name; built-in bell
Capacity
- Faces
- 50,000
- Fingerprints
- 100,000
- Cards
- 50,000 ID and IC.
- PINs
- 50,000
- Stored events
- 500,000
Hardware
- Screen
- 10.1″ HD, 1280×800
- Processor
- 1.2GHz dual-core ARM Cortex-A7, 0.6 TOPS NPU
- Memory
- 256MB DDR3 / 4GB eMMC
- Dimensions
- 299 × 161 × 20 mm
- Mounting
- Wall or desktop stand; turnstile bracket or floor stand optional
Doors and wiring
- Door output
- Door-open signal
- Alarms
- Door left open, forced door; alarm output
- Time permissions
- Yes
- External reader
- Access-control reader input
- Wiegand
- 26/34 input and output
Power and network
- Power over Ethernet
- Supported One cable to the door: data and power on the same run, with no socket needed beside the frame. Confirmed by the manufacturer: the datasheets in circulation predate it and list only the DC supply.
- DC power
- DC 12V (310 mA standby, 520 mA working) For a run with no PoE at the other end of it.
- Network
- Ethernet (TCP/IP), Wi-Fi optional, USB type-A
- Data transfer
- USB 2.0 host: import and export by USB stick
Attendance integration
- Live updates
- Real time, pushed The gateway holds an open stream and sends each punch the moment it happens. Somebody walks through the door and the live view has them, without a refresh and without a poll interval to wait out.
- If the network drops
- Nothing is lost The terminal keeps its own log, and Attendance polls the gateway on a watermark with a five-minute overlap. Reconnect and every punch made in the gap is imported, with its original time, not the time it arrived.
- Duplicate protection
- One punch, once The same event arriving by both push and poll is recognised as one punch, not two.
- Device health
- Online, last seen, collection state Shown per terminal in the portal, so a unit that has quietly stopped reporting is visible before somebody notices a missing shift.
- Verification status
- Integrated The model connects to Attendance for clock-in and clock-out, employee matching and synchronisation after a connection interruption.
- Firmware
- Runs custom Lemorange Attendance firmware
Environment
- Working temperature
- -15°C to +50°C
- Working humidity
- 20%-90%
- Storage temperature
- -40°C to +65°C
- Languages
- English, Spanish, Arabic, Thai, Farsi, Portuguese, French, Italian, Japanese, Korean and more Greek is not listed for the terminal interface; Attendance on web and mobile supports Greek.
The other models
LEM Ai8 Pro
LEM Ai8
LEM Ai3
LEM Ai2
LEM 1009
LEM 1008The terminal is the part you can change your mind about.
Every one of these writes into the same record, so a site can run two models on two doors, or replace one in three years, without anything downstream noticing. What you are choosing here is how people get through a particular door, not a platform.
Talk about your doors