Attendance with QR, RFID card, NFC or PIN.
The LEM 1008 has a 2.8″ screen and numeric keypad for PIN entry. It records attendance with QR codes, RFID cards or NFC and can control the door at the same time. It uses no biometrics. With a backup battery, it keeps running and storing attendance records during a power cut.
LEM 1008QR Code, RFID & PIN Time Attendance and Access Control
What this one is good at
Attendance and access control
Releases the lock and records the punch, in one action, into the same record everything else reads. The rest of this page is about what it does not have.
QR, RFID card, NFC and PIN
It reads temporary, dynamic, card and visitor QR codes, plus ID cards as standard with IC cards as an option. An NFC reader can be added. The separate numeric keypad provides PIN entry.
500,000 events on board
The local log stores up to 500,000 events. It also holds 100,000 QR codes, 5,000 cards and 5,000 PINs, and sends buffered attendance records after the connection returns.
Wiegand in and out
It can sit in front of an access controller you already own, reading credentials and passing them on, rather than replacing a working panel.
Straightforward coverage for additional entrances
Use the same attendance and access-control rules at secondary entrances without adding face or fingerprint identification where it is not required.
USB import and export
Its USB 2.0 host port supports data import and export with a USB drive when an installer needs a local transfer path.
Mounting options
One stand range for every Attendance terminal.
Choose a counter stand, a fixed-height floor stand or an adjustable model for the point of installation. Each option accepts every terminal named below, so the terminal can change without replacing the stand.
CountertopDesk or reception counterCounter stand
A compact metal stand for a reception desk, counter or other surface where a floor stand is unnecessary.
60 cmCompact heightFixed stand
A fixed, lower-height option for an installation that does not need adjustment.
110 cmFull heightFixed stand
A full-height fixed stand for a permanent staff entrance or exit point.
Up to 120 cmAdjustable heightTelescopic stand
Adjust the height up to 120 cm when the installation needs more flexibility.
With Attendance
The door happens, and it is in the software.
This is not a terminal you buy and then find an export routine for. It is integrated with Attendance at attendance.cy, and a punch at this door is in the live view before the person has finished walking through it.
Real time, not a poll interval
The gateway holds an open stream and pushes every event the instant it happens. No refresh, no five-minute wait, no "last synced at". Somebody checks in and the board has them.
Three layers, so nothing is lost
The push is the fast path. Behind it Attendance polls on a watermark with a five-minute overlap, and behind that the terminal keeps its own log: up to a million events. Cut the network for a week and every punch still arrives, carrying the time it was made.
Straight into hours, not a spreadsheet
The punch becomes a shift, the shift becomes hours, and the hours become an approved payroll batch: in one record, with the corrections attached to it. Nothing is re-keyed and nothing is reconciled by memory at the end of the month.
You can see the terminal itself
Online or not, when it was last seen, and whether collection is current or overdue: per unit, in the portal. A terminal that quietly stops reporting is visible the same day rather than when somebody queries a missing shift.
Right for
- Entrances where a separate numeric keypad is preferred
- Attendance with QR, RFID card, NFC or PIN and no biometrics
- Connecting to an existing access-control panel through Wiegand
- Secondary entrances using the same Attendance environment
Not right for
Teams that want a larger touch screen or NFC phone check-in as standard. For those, choose the LEM 1009.
Every angle
Three-quarter view 
Base and USB port 
Rear: terminal block and USB
Buying
- Delivery and installation
- Free anywhere in Cyprus: we deliver it, mount it and connect it. Outside Cyprus, delivery is quoted per order and the terminal arrives set up, ready for you to mount.
- 24-month warranty
- If it stops working as it should, we replace it.
- Rent to own
- Pay monthly instead of up front. After 24 months the terminal is yours. Ask us for the monthly rate.
- Software
- Sold separately. The price depends on the features you use and how many people you have. Ask us.
Specifications
Verification
- Methods
- QR code, RFID card, NFC, password
- RFID and NFC
- RFID reader, NFC reader or both We can add an RFID reader, an NFC reader or both to every model.
- QR use
- Temporary, dynamic, card and visitor QR codes
- Supported code formats
- QR, Micro QR, PDF417, Code 128 and Code 39
- Card
- ID card as standard, IC card optional
- Input
- Touch keypad
Capacity
- QR codes
- 100,000
- Cards
- 5,000
- Passwords
- 5,000
- Stored events
- 500,000
Hardware
- Screen
- 2.8″ colour screen
- Dimensions
- 165 × 80 × 25 mm
- Processor
- ARM Cortex-A7 800MHz, 0.8T NPU
- Memory
- 256MB DDR3 / 4GB eMMC
- Operating system
- Linux 4.19
- Audio
- Built-in speaker with voice prompts
Doors and wiring
- Lock relay
- NC, COM and NO outputs
- Exit button input
- Yes
- Doorbell
- Output, and an external ring
- Wiegand
- 26/34-bit input and output
Power and network
- Power over Ethernet
- Supported One cable to the door: data and power on the same run, with no socket needed beside the frame. Confirmed by the manufacturer: the datasheets in circulation predate it and list only the DC supply.
- Backup battery
- Available The terminal keeps reading and keeps recording through a power cut, so the punches either side of it are still one shift. Confirmed by the manufacturer: this model's datasheet does not carry the row.
- DC power
- DC 12V 2A For a run with no PoE at the other end of it.
- Network
- Ethernet (TCP/IP), Wi-Fi optional, USB type-A
- Data transfer
- USB 2.0 host: import and export by USB stick
Attendance integration
- Live updates
- Real time, pushed The gateway holds an open stream and sends each punch the moment it happens. Somebody walks through the door and the live view has them, without a refresh and without a poll interval to wait out.
- If the network drops
- Nothing is lost The terminal keeps its own log, and Attendance polls the gateway on a watermark with a five-minute overlap. Reconnect and every punch made in the gap is imported, with its original time, not the time it arrived.
- Duplicate protection
- One punch, once The same event arriving by both push and poll is recognised as one punch, not two.
- Device health
- Online, last seen, collection state Shown per terminal in the portal, so a unit that has quietly stopped reporting is visible before somebody notices a missing shift.
- Verification status
- Integrated The model connects to Attendance for clock-in and clock-out, employee matching and synchronisation after a connection interruption.
- Firmware
- Runs custom Lemorange Attendance firmware
Environment
- Working temperature
- 0°C to +45°C
- Working humidity
- 20%-90%
- Languages
- 20, with voice prompts The manufacturer lists English, Spanish, Arabic, Thai, Farsi, Portuguese, French, Italian, Japanese and Korean among them.
The other models
LEM Ai10
LEM Ai8 Pro
LEM Ai8
LEM Ai3
LEM Ai2
LEM 1009The terminal is the part you can change your mind about.
Every one of these writes into the same record, so a site can run two models on two doors, or replace one in three years, without anything downstream noticing. What you are choosing here is how people get through a particular door, not a platform.
Talk about your doors