Skip to content
Company vehicle in Cyprus.

Construction fleet tracking in Cyprus

See which vehicle reached a site and when, while keeping vehicle activity separate from the crew’s work record.

Map the movements you need to coordinate

A site team may leave a depot, collect materials, work at one project and move to another before returning. The office needs to know which van is available, where it last reported and whether it reached the expected place. Fleet provides a live vehicle map, day trips and stops. Places used for staff check-in can become zones in the fleet system, supporting entry and exit events. Start with the specific site and vehicle questions the dispatcher asks each day. Do not add a tracker to every machine simply because the vans are tracked; an unpowered asset requires a different device and workflow that this vehicle-focused product does not cover.

For a construction fleet, site names and vehicle assignments change. Keep the catalogue current: plate, home location, usual driver and department scope. Test who can see each vehicle. A supervisor working one region should not automatically gain every branch’s historic positions. The fleet directory scopes managers by locations and departments. Review that scope after a team or vehicle moves between projects, otherwise the map can be accurate yet displayed to the wrong person.

Link the day without treating a van as a timesheet

A van arriving at a site does not prove every person in the crew began work at that time. The driver may wait, unload or leave while others remain. Attendance on the phone or terminal records each worker’s own clock-in. Fleet’s vehicle trail gives context for dispatch and project review; it does not convert stops into paid hours. If managers compare the two records, they should see their distinct source and correct an attendance record through the attendance workflow, not by moving a map point.

A practical daily review can start with the site schedule and expected vehicles. The supervisor checks a late arrival against the last valid report and calls the team if the information is old. At day end, the manager reviews exceptions: a van that visited the wrong site, a prolonged stop or a fuel transaction needing confirmation. Each question has a human check. The route alone cannot tell whether a site was safe, whether the job was complete or whether a worker had taken a break.

Install for the way a site vehicle is used

Ask where each van is parked, whether it is shared, whether its power system is modified and whether it regularly enters covered or underground areas. Check the mount point and the test trip with the installer. Verify a current fix at the depot and at a representative site. If a vehicle is leased, record approval for wiring and removal. A unit transferred between vans must be reassigned in the catalogue and tested again. The same care applies to SIM connectivity: a national coverage claim is no substitute for the routes your crews use.

Keep place data aligned with the work

Construction sites open, move and close. A place created for staff check-in can be synchronised as a Fleet zone, but it should have a recognised name and an owner who maintains it. Before using an entry alert, make a test drive to the site and inspect how the boundary works. A road skirting the site may produce a different event from a van entering the gate. Do not treat the zone event as proof that materials were delivered or a worker began a task. Pair it with the site log or job record.

If a crew changes projects, update vehicle home location and department assignments where appropriate. The live directory limits managers to the vehicles in their scope. A supervisor who has moved to another region should not retain access to the old region simply because their role title did not change. Use a periodic access review with actual users and plates. The site manager needs enough visibility to coordinate; the office does not need to expose everyone’s entire route to every project.

Separate crew time from vehicle time

A vehicle can arrive before a crew clocks in, leave to collect supplies and return while the crew remains on site. One van may also carry several people whose breaks and shifts differ. The vehicle trail therefore cannot calculate paid hours. The attendance product holds clock-ins and approved hours, while Fleet holds trips and stops. Put them side by side when investigating an exception, but correct each record through its own workflow. The distinction also helps explain a delay without accusing a person based on a vehicle marker.

For daily coordination, list expected staff and vehicles for each site. At the start of the shift, check which van last reported near the site and which employees have actually clocked in. If the two lists disagree, call the supervisor. At the end of the day, review unexpected movement or long stops against the site’s work plan. Record explanations in the job process. A map alone cannot tell whether a worker was loading, waiting for access or doing a task indoors.

Draw the equipment boundary clearly

An excavator, trailer or generator may have a different power supply, weather exposure and movement pattern from a road vehicle. A battery tracker might be considered for an unpowered asset, but Fleet has no separate asset catalogue or long-life battery reporting workflow. Keep such equipment out of the committed scope unless the device, SIM, installation and software screens are demonstrated for it. Hardware capability is not the same as a delivered product feature.

Even a construction vehicle needs a fit check: who owns it, can it be wired, when is it available to the installer and where will it be serviced? Ask for a test trip from the yard to a representative site. Confirm the last-report state in a covered area, the vehicle assignment and the managers who can see it. An acceptance record should describe those results. If the pilot fails at a critical site, investigate coverage and configuration before increasing the number of fitted vehicles.

Review fuel in the context of site work

A site vehicle can idle while powering equipment, queue for materials or make short journeys with frequent stops. A fuel comparison across such vehicles should not assume identical duty. Fleet can import card transactions and show litres, spend, distance and idling context by vehicle. It cannot read the FTC164 tank level. When a vehicle looks unusual, first check whether the card transaction was matched to the right plate and whether the period includes all trips. Then ask the site manager about the work performed.

An idle-fuel figure is an estimate from a configured rate, not a measured loss. Do not promise savings from eliminating every idle hour. Some idle may be required by the work; other idle may be avoidable. The value of the report is that it gives the team a specific event and period to discuss. Keep the original transaction and any correction traceable, especially when several vehicles share a project budget.

A site-day check for the supervisor

At the morning briefing, list crews, expected vehicles and planned sites. Check the attendance record for who has started work, then the Fleet map for the vehicles’ latest valid reports. If a van is overdue, call the team rather than assuming it is still at the last marker. If a site zone is used, ask what action follows its entry event. A zone event may support coordination, but it does not replace the site log or individual clock-in.

At a midday change, update the expected site and check whether the right managers can see the transferred vehicle. A vehicle assignment that remains tied to an old department can expose a route to the wrong team or hide it from the new supervisor. If a machine without vehicle power must also be followed, treat that as a separate requirement. Fleet is for fitted vehicles; do not include generators or unpowered equipment in the delivered scope without a demonstrated device and screen.

At day end, compare unexpected van movement and fuel entries with the project record. A long stop may reflect loading, waiting or a task indoors. An idle-fuel figure is only an estimate from a configured rate. Record any explanation and keep the original route and transaction unchanged. This creates a review that helps tomorrow’s planning without turning vehicle locations into a substitute for the crew’s work records.

Plan differently for a van, a plant machine and a trailer

A site van driven daily benefits from a current position, trips and zone alerts. A machine parked through a weekend may need infrequent scheduled reports to preserve its battery. The FTC164 enclosure is rated IP69K and has a backup battery, making it a candidate for wet, dusty work, subject to proper wiring and mount. Fleet already shows locations and after-hours, towing and unplug alerts when the installed scenarios generate them. Its current screens do not turn the FTC164 ignition counter into an engine-hours report, or an input wire into a PTO-hours record.

For agricultural equipment, field zones and theft review are feasible today; implement sensors and CAN-derived machine data are outside the present Fleet flow. For waste trucks, route completion and idling can be reviewed, but a lift switch on a tracker input does not become a counted bin lift in Fleet. A trailer can use the device battery and Power Off Sleep for occasional checks, but that mode turns off towing and unplug alarms. Write down which risk matters most before choosing the sleep profile.

Sources

  1. Teltonika FTC164 datasheet
  2. Teltonika FTC164 system settings
  3. Teltonika FTC164 launch notes
  4. Teltonika usage scenarios

Frequently asked questions

Does the system track every excavator or generator?

Fleet tracks vehicles fitted with a tracker. It has no separate battery asset-tracking workflow.

Does a site arrival clock the crew in?

No. Vehicle arrival and individual attendance are separate records.

Can managers see all project vehicles?

Visibility depends on the vehicle’s location and department assignments and the manager’s permissions.

Discuss your fleet requirements

Ask for a quote based on your vehicles and operational needs.